This cable is designed for use with domestic and commercial security alarm systems, as well as other applications where low voltage and low currents are required. The cable has a tubed sheath construction and incorporates a nylon rip cord and is manufactured according to BS4737 section 3.30 2015.
* TYPE 1 with LSZH insulation / outer jacket (less than 100 ohm/km resistance)
* TYPE 2 with PVC insulation / outer jacket (less than 100 ohm/km resistance
* TYPE 3 with PVC insulation / outer jacket (less than 155 ohm/km resistance)
The cable construct
uses 7/0.2 tinned annealed copper conductors (Type 1 & 2) and 7/0.2 copper alloy (Type 3 commercial grade). Cores are PVC/LSZH insulated with multiple coloured cores twisted together. Cables can be unscreened or screened with aluminium polyester tape and copper drain wire in contact with tape screen. Types 1,2,3 can be readily identified by the coloured rip cords of green, red and yellow respectively. Cable is then over sheathed with either PVC, LSF, LSZH or PE. (Armoured versions are also available).
Cable is available in a variety of core counts from 4,6,8,12,20,30.
Operating temperature is -15DegC to +70DegC. Minimum bend radius is 6 x O.D.
Cable jacket colour can be any colour (white is most popular) and customised jacket printing is optional.
Cable is REACH and RoHS compliant as well as CPR Eca approved.